CPVC Compound for Injection Molding ED-Z500PF

CPVC Compound for Injection Molding ED-Z500PF

Technical Specification

Appearance:                              Yellowish Pellet

Specific Gravity (g/cm³)       :                  ≥1.47

Heat Vicat Softening Temp (℃):             ≥103

Tensile Stress at Yield (Mpa) :               ≥50

Charpy Impact, Notched (KJ/M2)            ≥8.0

General Information

ED-Z500PF is chlorinated polyvinyl chloride compound used in a variety of industrial applications where a high functional temperature and resistance to corrosive chemicals are desirable. These cost-effective compounds combine high strength performance, high heat distortion temperature, chemical resistance, flame retardancy and low smoke generation. Key performance properties are optimized through the selection of appropriate additives to meet certain regulatory and performance requirements.

Application

ED-Z500PF is developed for the injection molding of fittings for water supply.

They are widely used to produce pipes fittings for conveying systems of cold and hot water, super clean water, drinking water, sewage, water processing, air-conditioning water in residential usage such as office buildings, education, healthcare, hospitality, mass transit, villa, pool and spa, etc.

Package, Storage & Transportation

N.W.25KG in plastic woven bag. Stored in the dry ventilated warehouse avoid light and rain. It is non-flammable and non-explosive. Handle and transport in accordance with general regulations.