Mobile version
QR code
| BrandHongye silicon rubber Co.,Ltd | Valid until2020-12-31 [Expired] | Latest update2013-07-29 15:24 |
| Views79 |
Liquid Silicone rubber for gypsum molds
Liquid Silicone rubber for gypsum molds
1.Liquid Silicone rubber for gypsum can used for gypsum crafts, gypsum statues , gypsum ceiling rose , gypsum columns , gypsum line , gypsum ceiling board ,and all kinds of gypsum decorations .
Liquid Silicone rubber for gypsum features
Liquid Silicone rubber for gypsum is two part silicone with general hardness of 22-50A°after curing with features ------
(1) high tensile & tear strength
(2) high duplication times
(3) Low linear shrinkage
(4) resistance to high-temperature
(5) Low shrinkage and non-deformation
(6)resistance to acid-alkali and expansion
Liquid Silicone rubber for gypsum operation instructions
Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two:vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3-5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original gypsum mold slowly .
10~12months, when stored in a dry & cool place under the room temperature 25.
Packing for Liquid Silicone rubber for gypsum
1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing,200 kg/drum
For more information , pls feel free to contact Ms Sabrina
