Mending Mould

CMC-SKD11-3 Repair cold working steel (punch die) Mending cut dies & shears ???Excellent welding usability, preheat is not required & no cracks Hardness: HRC 56~58 No copper plating but great antirust property??‰ For welding cold work steels, punch dies, cutting dies & shears, piercing form, industrial knives, forming dies, harden surface of work piece. This is a sort of high hardness, grinding-resisted, great toughness Argon filler rod. CMC-SKD61-2 Repair hot working steel (forging die)???Mending hot working form shears ???Excellent welding usability, preheat is not required & no cracks High temperature resistant High hardness: HRC 52~57??‰ For welding hot forging die, hot cut die, hot punch die, hot formation die, hot work tool, steel casting die. CMC-SKD61 Repair hot working steel (casting die) Repair die casting die ???Design for Aluminum (Al) & Magnesium (Mg) die casting die Hardness: HRC 42~46, Good machining property High temperature resistant??‰ For welding Aluminum & Magnesium casting die. Extrusion dies. Well heat-resisted, grinding-resisted, crack-resisted. CMC-2365 Repair hammer forging dies Repair hot working steel ???Design for hammer-forging die Hardness: HRC 42~46, Good machining property High temperature resistant??‰ For welding hammer-forging die, Aluminum & Copper hot forging die, Aluminum & Copper casting die. great heat-resisted, grinding-resisted, crack-resisted. CMC-8407-H12 Repair hot working steel (forging die) Mending hot working form shears ???Excellent welding usability, preheat is not required & no crack High temperature resistant High hardness: HRC 52~57??‰ For welding hot forging die, hot cutting die, hot punch die, hot formation die, hot work tool, steel casting die. CMC-8407 Repair hot working steel (casting die) Repair die casting die ???Design for Aluminum (Al) & Magnesium (Mg) die casting die Hardness: HRC 40~45, Good machining property High temperature resistant??‰ For welding the die made of the alloy of Zinc, Aluminum, Stannum, etc. CMC-M3-2 Repair high speed steel Mending cut die & shears ???Design for joining a broad range of high speed steel High hardness: HRC 61~63, Good machining property Excellent welding usability??‰ For welding & stretching, hot work and high hardness tool mold, hot forging general die, hot punch die, screw die, grinding-resisted hard surface, High-speed steel. CMC-MS-3 Repair Maraging stainless steel Mending Aluminum gravity casting dies ???Design for repair Maraging stainless steel Untreated:HRC30-32 After age hardening 2H/500???:HRC48-52??‰ Special hardening good toughness alloy, especially adapt to Aluminum gravity cast, gate, be able to extend product's life-span for 3-5 times afterwards. Be able to manufacture the greatly exact mold, super satin process, heat-resisted and crack-resisted when doing gating-weld. CmC-12Cr Specially used for Cr12??BCr12MoV series mold argon welding wire. If more than three layers need to be welded, CMC-30N can be used as the base. When being used for Cr12 after heat treatment, no need of preheating for small area. The weld hardness is enough, it can be used for mechanical processing. CMC-Magic1 Very not easy to crack, suitable for high carbon content heat-treated steel. Be used for embossing & drawing die, which can greatly reduce the scratches caused by bending and stretching between high tension steel and ordinary one. CMC Tig Rod For Underlay Build-Up CMC-30N Repair cracks Repair unknown base metals ???Repair cracks Buffer layers on difficult-to-weld Repair unknown base metals??‰ Used for joining a broad range of difficult-to-weld metals including special austenitic-manganese. Make overlay onto Air hardening materials .For joining dissimilar-metal. Depending on the ferrit content suitable for designed for joining difficult-to-weld steels, welding of dissimilar joints and rebuilding or buffering before hardsurfacing. CMC-60N ???Repair cracks on hot working steel, very high temperature resistant???Repair glass dies & cast iron.??‰ For repairing cracks on hot working steel, welding and rebuilding. Welding onto meld high hardness steel. The temperature ranges up to 980 Celsius degree. Also used for repair glass dies & mold. CMC-61N Repair cast iron die ???Repair cast iron die???Excellent crack resistance & good tensile strength???Excellent welding usability, preheat is not required??‰ CmC 61N is a pure Ni alloy rod. The weld metal provides excellent machining property, good tensile strength and good crack resistance. It is suitable for the repair welding of high pressure parts and cast iron products, etc. CMC-67N Repair cast iron die ???Economical TIG welding for repairing all kinds of cast iron.??‰ Economical TIG welding for repairing all kinds of cast iron. Excellent welding usability, preheat is not required and machining property. CMC-SSH Repair high Chromium Cast Iron Mending drawbead part of automobile panel press die ???Suitable for repairing and joining of High Chromium Cast Iron (GM241)HRC 48~52 For mending drawbead part of sheet metal press die??‰ Used for welding directly on High Chromium Cast Iron, cast iron, could be high strength, and good ductility. After welded would be high hardness and easy to polish that could reduce drawing stamp. Applied to cast iron and ductile iron and suitable for machinery processing. Also used for die steel parts such as S45C and steel casting, etc. Enhance their roughness and hardness, mainly used for glass fiber dies, sheet hardware stamping dies. CMC Tig Rod Wires For Repair Plastic Die CMC-75 Easily to corrosion dermatoglyphics Easy to engraving machining. ???Suitable for repairing and joining of S45C & S55C HRC 25~27, most easily to mould texturing Repair shoe sole mould??‰ TIG Welding Rods used for plastic injection mold, most easily to mould texturing. Excellent electric erosion and graving ability, used to weld shoe sole mould, easy to engraving machining. CMC-PDS-3 Easy to engraving machining. ???Suitable for repairing and joining of PDS-3 plastic mould steel HRC 28~30??‰ Injection thermosetting plastic die, heat-resisted die and corruption-resisted die, great performance at cutting and machining. Could be mould texturing CMC-718H Repairing and joining of 718 plastic mould steel ???Suitable for repairing and joining of 718 plastic mould steel High hardness HRC 30~33??‰ Argon welding wire applied to plastic injection mold. After welding, good molds machining, materials are uniform with high purity, easily to mould texturing, electric erosion and engraving ability. CMC-2738 Repairing and joining of 2738 plastic mould steel ???Repairing and joining of 2738 plastic mould steel HRC 32~35, easy to polish??‰ Injection thermosetting plastic die, Nitridable, Hard Chrome platable, flame hardenable. Great performance at machining, and electrical discharge machining. CMC-P20 Injection thermosetting plastic die, heat-resisted die, casting copper die. CMC-P20H Repairing and joining of P20 plastic mould steel ???Repairing and joining of P20 plastic mould steel High hardness HRC 30~33??‰ Strengthen the hardness on the original product CMC-P20. Argon welding wire applied to plastic injection mold. After welding, good molds machining, materials are uniform with high purity, Nitridable and electric erosion and engraving ability, material uniform with high hardness. CMC-P20Ni Strengthen the optical activity on the original product CMC-P20. Argon welding wire applied to injection mold. After welding, the machining process ability and corrosion resistance are good. CMC-NAK80 Repairing and joining of NAK 80 & NAK 55 plastic mould steel ???Repairing and joining of NAK 80 & NAK 55 plastic mould steel HRC 35~40, easy to polish??‰ Mirror Polishing, Injection thermosetting plastic die. CMC-NAK100 Repairing and joining of NAK 80 plastic mould steel ???Repairing and joining of NAK 80 & NAK 55 plastic mould steel HRC 35~40, Excellent mirror polishing.??‰ Strengthen much easy to polish on the original product CMC-NAK80. Excellent mirror polishing & photo etching. Could be mould texturing CMC-S136N Strengthen the optical activity on the original product CMC-S136. Excellent optical activity and corrosion resistance, be much easy to mirror polishing. CMC-STAVAX Repairing and joining of STAVAX plastic mould steel (Repairing and joining of STAVAX plastic mould steel After welded HRC 50~54, Excellent mirror polishing.) Anti-acid mold steel, especially for argon welding rod for injection molds of the production of PS, SAN. After welding, molds will have the excellent optical activity and corrosion resistance; Great wear-resistance, good machining processing ability, stable and hard. CMC-2316 Repairing and joining of 2316 plastic mould steel (Repairing and joining of 2316 plastic mould steel After welded HRC 30~34, Easy to polishing.) The weld is corrosion-resistant, polishable, etch-graionable, economical to machine.